Home | Augers | Country Clipper Mowers | Grain Drying | Tillage Tools | Service | Site Map | Store
<- Previous - Contents - Next ->
This is the parts manual for "04 Series" mowers with 52 and 60 inch "05" model decks manufactured from 2000 to 2002, including model numbers: 2304MT, 2504MT, 2204M, 2304M, 2504M, and 2304KA, and deck models 5204M and 6004M.
(a printed manual is available for purchase here)
Ref # | Part Num | QTY | Description | Ref # | Part Num | QTY | Description | |
1 | 642-021W | 1 | Front axel Weldment | 25 | F-1691 | 2 | Clevis Pin, 3/8" X 1" | |
2 | 642-040W | 1 | Frame weldment, LH | 26 | F-1486 | 4 | 3/8-16 jam nut | |
3 | 642-039W | 1 | Frame Weldment, RH | 27 | F-1239 | 2 | 3/8 - 16 nylock nut | |
4 | 642-019W | 1 | Front pivot channel | 28 | F-1896 | 2 | Clevis pin, 1/2 x 1-3/4" | |
5 | 642-059P | 4 | Link bar | 29 | F-1521 | 8 | Washer, 1/2" narrow | |
6 | 642-100P | 1 | Deck latch (flip-up) | 30 | - | - | - | |
7 | 642-067P | 4 | Top hanger pin | 31 | 642-151P | 2 | spring anchor | |
8 | 620-051P | 1 | Lift bar | 32 | F-1456 | 4 | roll pin, 3/16 X 2" | |
9 | 642-081P | 2 | Lift sleeve, front | 33* | 642-153W | 2 | Hanger end weldment | |
10 | 642-082P | 2 | Lift sleeve, rear | 34 | H-2104 | 2 | Ext. spring, 2-7/32 X 0.312 | |
11* | 642-101W | 2 | eye bolt weldment | 35* | F-1066 | 2 | Capscrew, 3/8-16 X 4" | |
12* | 642-066P | 2 | Adjustable hanger rod | 36 | 629-172W | 1 | Foot assist, deck lift | |
13* | H-2238 | 2 | Spring, snap, load rated | 37 | 642-175P | 2 | Adjustable hanger end | |
14 | H-2239 | 8 | RUE ring, 1/2" | 38 | 642-177P | 4 | Hanger pin | |
15 | F-1890 | 2 | Clevis pin, 1/2 X 3-1/2" | 39 | F-1936 | 4 | 1/2-13 X 3-1/2, 2" thread | |
16 | F-1898 | 4 | Clevis pin, 1/2 X 2-3/4" | 40 | F-1489 | 4 | Nut, 1/2" jam | |
17 | F-1492 | 2 | RUE Ring, 5/16 - 3/8 pin | 41 | 642-183A | 2 | Rear deck hanger assembly | |
18 | 642-105P | 2 | Roller | 42 | 642-178P | 1 | Latch | |
19 | 642-069P | 2 | Spacer, top peg | 43 | F-1716 | 1 | 1/4 X 1-1/2" grade 5 | |
20 | F-1036-37 | 4 | Roll pin, 5/16 dia X 1.750 | 44 | F-1158 | 1 | Nut, 1/4" stover | |
21 | F-1009-02 | 10 | flat washer, 5/16" | 45 | H-2390 | 1 | Spring, 0.219 OD X 0.024 wire | |
22 | F-1573 | 2 | 3/8 - 24 Lock nut | 46* | 642-176W | 1 | Rear deck hanger weldment | |
23 | F-1572 | 2 | 3/8-24 X 1-1/2 HH Grade 5 | 47 | D-3723 | 1 | 1/4" chrome steel ball | |
24* | F-1616 | 2 | 3/8-16 X 3-1/4 HH Grade 5 |
Blue underlined part numbers are available for immediate purchase by clicking the part number. For other parts, click here for ordering instructions.
* If your mower has any of the parts marked with an asterisk, we recommend that you upgrade to the QRS system instead.
<- Previous - Contents - Next ->