Home | Augers | Country Clipper Mowers | Grain Drying | Tillage Tools | Service | Site Map | Store
<- Previous - Contents - Next ->
This is the parts manual for "04 Series" mowers with 52 and 60 inch "05" model decks manufactured from 2000 to 2002, including model numbers: 2304MT, 2504MT, 2204M, 2304M, 2504M, and 2304KA, and deck models 5204M and 6004M.
(a printed manual is available for purchase here)
Ref # | Part Num | QTY | Description | Ref # | Part Num | QTY | Description | |
1 | 625-026P | 2 | Shift arm | 12 | F-1015-05 | 4 | 1/4-20 X 1" Grade 5 | |
2 | 638-027A | 1 | Linkage disk assembly | 13 | H-1885 | 6 | Ball joint | |
3 | 636-078W | 1 | Shift rod | 14 | F-1725 | 2 | Roll pin, 5MM X 26MM | |
4 | 625-030P | 1 | Swivel arm | 15 | F-1503 | 1 | Roll pin, 3/16" X 1" | |
5 | 642-097P | 2 | Lower linkage rod | 16 | 625-024P | 2 | Upper linkage rod | |
6 | H-1987 | 4 | Large bushing | 17 | F-1864 | 2 | 1/4-20 X 1-3/4" Grade 5 | |
7 | H-1989 | 4 | Small bushing | 18 | F-1487 | 6 | 1/4-28 X Jam nut | |
8 | F-1009-01 | 4 | 1/4" flat washer | 19 | F-1695 | 2 | Set screw, 1/2" long | |
9 | F-1158 | 6 | 1/4-20 locknut | 20 | H-2076 | 2 | Ball joint, LH thread | |
10 | F-1019-01 | 2 | 1/4" lock washer | 21 | F-1814 | 2 | 1/4-28 Jam nut, LH | |
11 | F-1716 | 2 | 1/4-20 X 1-1/2 Grade 5 |
Some of the above parts are in the following sub-assemblies (which can be ordered pre-assembled):
H-2125 Upper linkage Assembly: |
642-096A Lower Linkage Assembly: |
|||
QTY | Part Num | QTY | Part Num | |
1 | 625-024P | 1 | 642-097P | |
1 | F-1487 | 2 | F-1487 | |
1 | F-1814 | 2 | H-1885 | |
1 | H-2076 | |||
1 | H-1885 |
Blue underlined part numbers are available for immediate purchase by clicking the part number. For other parts, click here for ordering instructions.
<- Previous - Contents - Next ->